SUPERNIGHT RGB LED Strip Lights – Child Safe Low Voltage Backlighting for Kids Bedrooms and Playrooms
SUPERNIGHT RGB LED Strip Lights – Child Safe Low Voltage Backlighting for Kids Bedrooms and Playrooms
Couldn't load pickup availability
Why you'll love it
- Black PCB blends invisibly with dark TVs, monitors, and black furniture where white strips would look ugly
- Wide RGB color palette via remote gives dozens of moods from one strip without buying multiple lights
- IP65 waterproof coating protects LEDs from kitchen humidity and accidental splashes near sinks
- 12V low voltage is safe to touch, making it child- and pet-friendly around the home
- 300 densely packed SMD 5050 LEDs deliver smooth, bright, even light without visible dark spots
- 16.4ft length covers a full 65-inch TV back or an entire bedroom perimeter in one run
- brighter and more brilliant color than original car interior LEDs
- even and consistent color across the strip with high LED density
- wide dimming range from very dim to very bright
- comes with adhesion promoter wipes included
- detailed installation instructions included
- responded fast and well to DMX512 controller for chase patterns
- cost-effective replacement for OEM LED strips on travel trailers
- good for splicing/extending using solderless 4-pin 10mm connectors
- Compatible with solderless 4-pin 10mm adapters for easy replacement
- Dimmable to very low levels for subtle night lighting
- Works well with DMX512 controllers for chase patterns and full color control
- LED density is higher than other brands previously used
- Works with Arduino controllers with fast output pin response
- Great value for the price
Perfect for
- TV bias/back lighting to reduce eye strain and add ambient glow during movies and gaming
- Bedroom mood lighting with color changes for relaxation or romance
- Christmas tree and mantel decoration for holiday parties
- Valentine's Day romantic ambiance with red/pink color presets
- Accent lighting on dark bookshelves, entertainment centers, and black PC cases
- replacing burnt-out LEDs in existing car interior LED kits
- extending an existing LED strip setup with shorter sections
- RGB Christmas lighting
- undercarriage lighting on a power chair for night visibility
- boat interior/marine LED lighting
- infinity mirror DIY projects for SSD drives
- adding dimmable accent lighting to an RV awning to replace harsh non-dimmable LEDs
- underglow on a Malibu wakesetter boat
- DMX512-controlled ambient ceiling lighting for room decor (potential animated Christmas display)
- Replacement LED strips for existing car interior lighting kit
- Power chair undercarriage visibility lighting at night
- Travel trailer awning lighting replacement (4-pin replacement strip)
- DMX512 controlled room ceiling lighting for potential animated Christmas decorations
- UTV interior lighting
- Back porch decorative lighting
- Marine/fishing boat installation
LED Type: SMD 5050; Light Color: RGB (Red/Green/Blue); PCB color: Black
Length: 500cm/16.4Ft
Width: 1cm; Height: 0.3cm
Luminous Flux: 6-7LM/per LED
LED Quantity: 300 LEDs Per 5 Meter or 60 LEDs Per Meter
Working Current: 2.54A; Working Input Voltage: DC 12V
Waterproof Rating: IP65
Viewing Angle: 120°
Working Temperature: -20℃ to 50℃
Package: 1 x 16.4ft 5050 LED strip light --Black PCB
Product Information
Black FPC LED Strip Light: The FPC is black, which is different from most of white FPC strips. Perfect black FPC strip for you to decorate TV, computer and other dark furniture RGB Color Changing Rope Lights: The led chip is SMD 5050, and each LED contains R, G, B, three independent lamp beads. You can use one RGB remote controller to change colors, such as red, orange, yellow, green, cyan, blue, purple, white, etc. Dozens of colors. Give you a true symphony visual experience. (Power supply and remote controller is NOT included!!!) IP65 Waterproof Tape: This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to protect LEDs against multi-directional, low-pressure water jets Low Power Consumption Strip: This rope light works with 12V power adapter, low Power Consumption & environmental. Safe to touch. (DC 12V Power is NOT included) Best After-Sales Service: Please contact with us if our 5050 LED strip light can not work or has other problem. Professional SUPERNIGHT team would help you solve any problems in 24 hours, all year around
Features & Specs Indoor Outdoor Usage Indoor Additional Features Color Changing Light Source Type LED Power Source Corded Electric Light Color RGB Controller Type Touch Control Voltage 12 Volts Wattage 60 watts Control Method Remote Water Resistance Level Waterproof Number of Batteries 5 A batteries required. Style Color Black Theme Tv Occasion Christmas Product Style Modern Measurements Number of Light Sources 300 Number of Items 1
Frequently Asked Questions
Is this LED strip safe to install in a toddler or nursery bedroom?
Yes. The strip operates at 12V DC, which is safe to touch, and the surface stays cool enough that a small child touching it will not be burned. It is a popular alternative to plug in night lights and lamps in nurseries where parents want soft ambient glow without hot bulbs.
Will my child be able to turn it on and off easily?
Yes, the included remote has large, clearly labeled buttons for power, color, brightness, and mode. Younger children can be taught to use just the on and off buttons, and older kids typically enjoy cycling through colors and modes on their own.
Is the surface cool enough that a child will not get burned if they touch it?
Yes. The strip is designed for low voltage operation and stays warm at most, well below the temperature of a hot light bulb. That is one of the main reasons it is recommended for kids' bedrooms, playrooms, and bunk beds.
Can I use this as a night light for a child who is afraid of the dark?
Yes. The strip can be dimmed to a very low level and set to a warm color, giving a soft, reassuring glow all night. Many parents prefer it over a bright plug in night light because the light wash across the wall or headboard feels less harsh.
Is it safe to leave the strip on overnight in a child's room?
Yes. The 12V DC operation and cool running surface make it safe to leave on for long periods, including overnight. We still recommend mounting it out of reach of very young children so they cannot pull on the cable, and using the included power supply as intended.
Will my pet be safe around a strip in the kids' room?
Yes. The strip stays cool and the voltage is low, so curious pets that brush against it will not be harmed. The IP65 coating also resists moisture, which is helpful in homes where pets might knock over a water bowl near the mounting area.
How is this better than a lava lamp or novelty night light for a kid's room?
Unlike a lava lamp with a hot bulb and hot glass, this strip stays cool, uses less energy, and lights up a much larger area. A single strip can wash a whole headboard or ceiling edge in color, so the room feels more like a designed space than a single small glowing object.
Can the strip be set to warm white rather than RGB colors for a calmer mood?
Yes. The remote includes warm white and several pastel tones in addition to the bold RGB colors. Parents often use a soft warm tone for bedtime reading and let kids switch to brighter colors for play time, all from the same strip.
Will my kid be able to peel the strip off the wall and hurt themselves?
The adhesive is strong enough to hold the strip in place but not so aggressive that it damages most painted walls when carefully removed. Mounting the strip higher up, behind the headboard, or along the top of a shelf keeps it out of reach of small children who might pull on it.
Is it safe to use this around a wooden bunk bed or loft bed?
Yes. The strip runs cool and the 12V adapter is designed for continuous use, so mounting along the underside of a top bunk or the inside of a loft bed ladder is a common setup. Just keep the cable routed so it cannot be pulled or chewed, and the included power supply plugged into a standard outlet.
Can this be used in a shared sibling bedroom to give each kid their own color?
Yes, with a short length on each side of the room you can run the same strip but use different colors and brightness on each section. Some parents mount a strip on each side of a shared room, with each child using the remote to pick their own color for the evening.
Is there any risk of the LEDs blinding my child at night?
Not at the brightness levels typically used as a night light. The dimming range goes down to barely visible, so you can set a very soft glow suitable for sleep. Avoid mounting the strip at eye level when the child is lying down, and angle it toward the wall or ceiling for indirect light.
Will my child choke on the small parts in the box?
The box contains the LED strip, the power supply, the remote, and a small number of mounting accessories. As with any small electronic accessory, the kit should be unpacked by an adult and small parts kept away from very young children, just as you would with any consumer electronics packaging.
Is the strip a good alternative to candles for a kids' birthday party?
Yes. Birthday candles on a cake are a brief tradition, but for general party atmosphere LED strips are a much safer way to add color to a playroom or living room. You can set the strip to bright party colors and the kids can change modes with the remote.
Can I use this safely in a playroom where kids run around and touch walls?
Yes. Mounting the strip higher up on the wall, along the ceiling edge, or behind a piece of furniture keeps it out of the way of running hands. Because it stays cool and runs at low voltage, even if a child does brush against it, the strip itself will not cause injury.
How do I install the LED strip on a wall or behind my TV?
Clean the mounting surface with alcohol or a non oily cleaner, let it dry, then wipe the area with one of the included adhesion promoter wipes. Peel the backing off the strip and press it firmly into place along your planned route, holding each section for a few seconds. Plug the 12V adapter into a wall outlet, connect the strip, and use the remote to test colors and brightness before final mounting.
Can I cut the strip to a shorter length, and how do I reconnect it?
Yes. The strip is clearly marked with cut lines at regular intervals, and you can cut on those lines with scissors. To reconnect two pieces, you can use solderless 4 pin 10mm connectors, which are widely available and clip directly onto the cut ends, or you can solder a short jumper wire. The included instructions show the cut points and connector orientation.
How do I extend the strip if 16.4 feet is not enough?
You can join two strips using solderless 4 pin 10mm connectors between the cut ends, which preserves the RGB and power connections. For longer runs, use a higher capacity 12V power supply rated for the combined wattage, since the included 60W supply is sized for one strip. Many users buy a second identical strip and connect them in parallel for a longer continuous run.
Will this strip work with my existing 4 pin car interior LED kit?
Yes, the strip uses a standard 4 pin 10mm RGB connection that is compatible with most car interior LED kits. Many users replace burnt out sections of their existing car kit with this strip, or use solderless 4 pin 10mm adapters to extend the kit into footwells, under seats, or along the dashboard. Always match the polarity on each pin when splicing into an existing harness.
Can I control this strip with a DMX512 controller or an Arduino?
Yes. With an appropriate DMX512 decoder placed between the 12V power supply and the strip, you can drive the RGB channels for chase patterns and full color control, which is why the strip is used in stage and ceiling installations. It also works with Arduino and similar microcontroller boards through a logic level MOSFET or LED driver shield, since the 5050 RGB chips respond quickly to PWM output.
What is included in the box, and what do I need to buy separately?
The kit includes the 16.4ft SMD 5050 RGB LED strip on black PCB, the infrared remote, a 12V power adapter, and adhesion promoter wipes. You will need to supply two AAA batteries for the remote, and optionally solderless 4 pin 10mm connectors if you plan to cut and rejoin the strip. No other tools are required for a basic install.
Is it safe to leave the strip plugged in 24/7?
Yes. The strip is designed for continuous use and runs cool at 12V DC, which is why it is commonly used as overnight ambient or night light. The included power supply has standard overcurrent and short circuit protection, and as long as the strip is mounted on a clean, dry surface and the cable is not pinched, leaving it plugged in long term is fine.
How long will the LEDs last before they start to dim or change color?
Quality 5050 SMD LEDs in a properly driven strip typically maintain brightness and color for tens of thousands of hours of use, which for most home users is many years of normal evening operation. The IP65 coating helps protect the LEDs and solder joints from humidity, and the 12V low voltage operation keeps the LEDs running well within their rated current, which is the main factor in long term color stability.
What is the difference between an RGB LED strip and a regular single color LED strip?
A single color LED strip only produces one fixed color, usually warm white or cool white, and you would need to buy a different strip for each color. An RGB LED strip like this one has red, green, and blue chips in every LED, mixed in different ratios to produce the full color palette, so one strip replaces several single color strips and you can change the color anytime from the remote.
