STAR-SPANGLED 3 Pack 7” Motion Sensor Light Indoor Battery Operated – Child Safe 4.5V LED Night Light for Nursery, Kids Room, and Stairs
STAR-SPANGLED 3 Pack 7” Motion Sensor Light Indoor Battery Operated – Child Safe 4.5V LED Night Light for Nursery, Kids Room, and Stairs
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician required — renter-friendly adhesive mount and battery power
- Child-safe 4.5V battery operation eliminates electric shock risk versus plug-in alternatives
- Motion + light dual sensor means lights only activate in darkness, preserving battery life
- 90° rotating light bar lets users aim light exactly where needed instead of flooding the room
- Split design allows battery replacement without peeling adhesive or remounting the unit
- 3-pack value covers multiple problem spots (closet, stairs, under-cabinet) for one purchase
Perfect for
- Automatic closet illumination when the door opens in a dark room
- Stair and hallway safety lighting at night to prevent trips and falls
- Under-cabinet kitchen task lighting without hiring an electrician
- Hands-free nightlight for kids' rooms that turns on only when needed
- Pantry, laundry room, or entryway accent lighting on demand
Our motion sensor closet lights have motion sensor, light sensor and automatic delay function. It will not light up in bright environment to save energy.
Specification:
Power Supply: 3 AAA batteries (Not included)
Light Source: 8 x 0.5W High Bright SMD2835 LEDs
Luminous Flux: 80 lumens
Light CCT: 6500K
Light CRI: 90 Ra
Light Sensitive: <20 LUX
Sensor Distance: 16 ft / 5 m
Sensor Range: 120°
Sensor Time: 20s (Auto-delay)
Product Size: 7×1.8×1.2 inch
7" Motion Sensor Lights AAA Battery Operated
Rich in Features, Easy to Use, Tiny but Powerful
This motion sensor LED light will turns on when a movement is detected in the DARK. It will turn off within 20 seconds after detecting your LAST motion. It is perfect for Cabinet, Closet, Counter, Stairs, Kitchen, Bedroom, Storage room, Hallway, Laundry area, Safe box, Mailbox.
- Rich Sensing Configuration - Motion Sensor, Light Sensor and Auto-delay function.
- "A+" Sensor - 0 sec activated, 16ft (5m) sensor distance, 120° sensor range.
- "A+" Light Source - 8×0.5W 140 Lm/W Ra90 LEDs output 80 lumens with high CRI.
- 90° Swivel Bar - Adjust the LED bar up and down to expand the scope of illumination and detection.
- Battery Powered - Each uses 3 AAA batteries.
- Easy Installation - Custom “A+” super-sticky adhesive that lasts and won’t fall off.
Our motion sensor stair lights will turn on when motion is detected in the dark. It turns off after no motion is detected within 20 seconds.
Great for Stairs, Hallway, Steps, Dollhouse
Great for Bedroom, Laundry area, Toilet, Kitchen
Great for Drawer, Toolbox, Mailbox, Safe box
Great for Bookcase, Closet, Wardrobe, Cabinet
Each powered by 3 AAA batteries (not included). Exquisite packaging, easy to use, tiny but powerful.
Tips:
- Equipped with a Light Sensor, it ONLY turns ON when motion is detected in the DARK.
- With an auto-delay function, it ONLY turns OFF 20s after detecting the LAST movement.
- When batteries are inserted, it will briefly light up for 5s before turning off to indicate that it is WORKING.
- Battery Not Included.
Package Includes:
- 2 x STAR-SPANGLED 7” Motion Sensor Light Indoor AAA Battery Operated
- 1 x User Manual
- 1 x Exquisite color box packaging
Product Information
Motion Sensor and Light Sensor: Our under cabinet lights auto turn on when human motion is detected within 120 degree and 16 ft in a dark or low-light environment, and auto turn off after no motion is detected within 20 seconds Ultra-high Quality Light Source: 8 pcs 0.5W 140 Lm/W Ra 90 LEDs output 80 lumens with high CRI. Uses 80% high light transmittance lens, our under counter lights offer higher luminous efficiency, ensuring superior brightness while consuming less power Adjustable Lighting Angle and Soft Lighting: Our closet lights have a 90 degree rotating light bar, you can adjust the light bar up and down to expand the lighting range as needed. With anti-glare panel, it can provide soft lighting to protect your eyes Battery Operated: Each night stair light is powered by 3 AAA batteries (not included). Uncomplicated and safe, no worries about the risk of electric shock to children. To save power, it won't turn on if there's enough light in the area Split Design and Easy Installation: Just slide it, Our motion sensor light indoor is easy to remove and reinstall when the battery needs to be replaced. Customized ultra-adhesive pads ensures a stable installation and can be easily mounted on any surface
Features & Specs Room Type Bedroom, Classroom, Entryway, Home Office, Kids Room, Kitchen Specific Uses For Product Indoor use only Indoor Outdoor Usage Indoor Power Source Battery Powered Other Special Features of the Product Motion Sensor, Parallel Circuit, Rotatable, Strong Adhesive, Super Bright & Gentle Lighting Control Method Gesture Light Source LED Number of Light Sources 8 Voltage 4.5 Volts Light Color White Lighting Method Adjustable Bulb Base Prong Controller Type Push Button Switch Type Gesture Water Resistance Level Not Water Resistant Connectivity Protocol Free Control Brightness 80 Lumen Mounting Type Wall Mount Fixture Type Removable
Frequently Asked Questions
Is this motion light safe to mount in a toddler’s room?
Yes, it runs on 4.5V AAA batteries rather than mains power, there is no cord to chew, no hot bulb to touch, and the adhesive mount keeps it out of reach on the wall or bed frame.
Will my child be able to turn it on and off without help?
Yes, the motion and light dual sensor means the light comes on automatically when your child steps out of bed in the dark, no switch, button, or fumbling required.
Does the light get hot enough to burn a curious hand?
No, the 8 high-CRI LEDs and anti-glare panel run cool during normal use, and the 4.5V battery operation keeps the entire surface well below any burn-risk temperature.
Will the auto shutoff wake my child if it clicks or beeps?
No, the unit is silent, there is no audible click or beep, only a soft fade-on of light that typically does not disturb a sleeping child.
Is the adhesive strong enough that a climbing child cannot pull it off?
When mounted on a clean, flat surface the ultra-adhesive pad holds firmly, and mounting it above crib or bed height keeps it out of small hands in the first place.
Is this a good night light for potty training?
Yes, the motion sensor lights the path from bed to bathroom the moment your child’s feet hit the floor, and auto-off after 20 seconds means it does not stay on all night.
Will my baby be disturbed by the light turning on during a midnight feeding?
The light sensor blocks activation when any ambient light is present, and the soft 80-lumen output is gentle enough not to over-stimulate a drowsy infant.
Can I use it on the stairs to prevent falls for an older child?
Yes, the 16 ft PIR range and 120° detection angle cover a full staircase landing, lighting the path the moment a child steps onto the first stair.
Is the LED light safe for a child’s developing eyes?
Yes, the anti-glare panel and high-CRI (Ra 90) LEDs produce a soft, even wash without the harsh blue spikes that can strain young eyes.
What happens if my child pulls the light off the wall?
The split-body design means the front separates from the adhesive base, so a tug typically releases the front, after which the ultra-adhesive base can be re-pressed into place and the light snapped back on.
Will battery leakage be a hazard in a child’s room?
The split-body design lets you check and replace AAA batteries quickly, and using quality alkaline cells and removing them during long breaks prevents the leaks that cause the most concern.
Can I use this in a nursery without an electrician?
Yes, no wiring, no outlet, and no tools are required, so it is a renter-friendly and baby-room-friendly lighting upgrade from day one.
Does the motion sensor work with a child’s small steps?
Yes, the PIR sensor detects movement rather than weight, so even a toddler’s slow, quiet steps trigger the light reliably in a dark room.
Is the warm white variant better for a child’s bedroom?
Warm white is generally the gentler choice for a child’s room, and it is also available in the 3-color dimmable version so you can tune the tone to your child’s preference.
Will a child be tempted to play with the batteries?
The battery compartment is behind the split-body front, which is held snugly to the base, and mounting the unit above a young child’s reach keeps the AAA cells out of sight and out of mind.
Is this a good replacement for a plug-in night light in a kid’s room?
Yes, it removes the outlet, the cord, and the hot bulb, three of the most common child-safety concerns with traditional plug-in night lights.
How do I install the STAR-SPANGLED 3 Pack Motion Sensor Light?
Peel the protective film from the ultra-adhesive pad, press the base firmly onto a clean, flat, dry surface like painted drywall, tile, glass, or wood, wait a few seconds, then slide the light bar body onto the base and insert 3 AAA batteries per light.
How do I change the batteries without taking the whole light off the wall?
The split-body design lets you slide the front light bar off the wall-mounted base, swap the 3 AAA batteries, and snap the front back on, so the adhesive mount stays in place.
How do I switch between cool white, warm white, and the 3-color dimmable modes?
The cool white and warm white variants are fixed to a single color temperature, while the 3-color dimmable variant is controlled by a push button on the unit, each press cycles through the three color temperatures and dimming levels.
Does this light work with rechargeable AAA batteries?
Yes, any standard AAA cells, including rechargeable NiMH batteries, will power the unit, and using rechargeables is a good way to reduce long-term cost and waste.
Will the adhesive pads stick to textured or wallpapered walls?
The ultra-adhesive pads work best on smooth, flat, non-porous surfaces such as painted drywall, tile, glass, metal, and finished wood, very textured walls, brick, and most wallpapers will not hold the pad reliably.
What is included in the box?
Each box contains three 7” STAR-SPANGLED motion sensor lights and three ultra-adhesive mounting pads, AAA batteries are not included and need to be purchased separately.
Are the LEDs replaceable, and how long do they last?
The 8 high-CRI LEDs are rated for tens of thousands of hours of typical use and are integrated into the bar, so they are not user-replaceable, but the unit is designed to outlast many battery cycles under normal home use.
What should I do if the light does not turn on?
Check that the AAA batteries are fresh and inserted with the correct polarity, confirm that the room is dark enough to trigger the light sensor, walk into the 120° detection zone within 16 ft, and make sure the front body is fully seated on the base.
How is a motion sensor night light different from a standard plug-in night light?
A motion sensor night light only activates when movement is detected in darkness and runs on batteries, while a standard plug-in night light stays on whenever the outlet is powered and draws from the mains, the motion version saves energy, reduces always-on heat, and works in places without an outlet.
