Nilight Water Ready RGB-IC Strip Lights – Versatile Cabin and Tailgate Lighting for Off Road Adventures
Nilight Water Ready RGB-IC Strip Lights – Versatile Cabin and Tailgate Lighting for Off Road Adventures
Couldn't load pickup availability
Why you'll love it
- 16 million color options and chasing RGBIC effects create a premium, show-car look at a budget price
- Three control methods (app, RF remote, manual box) let any passenger operate lights without a smartphone
- Sound-activated mic syncs lights to any music, turning the cabin into an immersive audio-visual experience
- Hidden 2-wire design installs invisibly in dashboard gaps for a clean, factory-like finish
- Universal 12V DC compatibility works across cars, trucks, ATVs, and UTVs without extra adapters
- RGBIC variant (B0BBPHRS3D) adds individually addressable chasing effects that basic RGB strips cannot match
Perfect for
- Footwell and under-dash ambient lighting during night driving
- Music-synced interior light show synced to phone audio or in-car music
- Customizing truck, ATV, or UTV interior for off-road events and shows
- Personalizing a daily driver with chasing RGBIC color effects
- Creating mood lighting for road trips, tailgates, or car meets
Product Information
Dream COLOR: Our car lights covered 16 million colors and tones for selection and make your car personality. At the same time, it has a variety of scene modes for you to choose. Allowing you to enjoy rainbow-like lighting effects. 3 CONTROL METHODS：You can use the mobile app,16 Key RF wireless remote control and DC 12v manual control box to operate, a large number of dynamic light effects and easy-to-use DIY mode. SOUND SENSITIVE: Interior Lights will sync to music on your phone or any sound captured from microphone, then the interior lights will change their colors following the music rhythm. DYNAMIC MUSIC MODE：Featured with highly sensitive mic, our car interior light can dance smoothly with any music type, liven up your road trips, bring an immersive audio experience during your road trips. EASY TO INSTALL：There are three installation methods including double-sided tape fixing, cable tie fixing, and screw fixing, which can make the car light bar more firm and stable and not easy to fall. The 2-wire design can be easily hidden and installed in the gap, almost invisible.
Specification: Nilight 4Pcs Dream Color USB Interior Strip Light Voltage: DC 12V Control Method: APP Control/Remote Control/Manual Control Box SMD Chips:72pcs 5050 SMD LED light chips Control: Remote control, Sound control. Please note:1. Before installation, please make sure the surface is clean. 2.Tear off the double-sided tape and stick it to the position you want to install.3.Use cable ties or screws to fix the light belt, which can be more stable.
Frequently Asked Questions
Can these interior lights be used outside the cabin like at a campsite?
The 12V input runs from any portable battery pack, power station, or vehicle cigarette socket, so you can move the strips into a tent, awning, or tailgate setup for campsite ambience without rewiring.
Are the LED strips durable enough for off road dust and vibration?
The silicone coated strips resist dust and light moisture, and the flexible PCB absorbs typical off road vibration, making them suitable for UTV, ATV, and overland truck cabs in dry to mildly wet conditions.
Will the music sync mode work at a loud outdoor tailgate?
The built in microphone is sensitive enough to pick up tailgate speakers and portable Bluetooth audio, and you can raise or lower the mic gain in the app to match the noise level.
Can I power the lights from a portable power station for camping?
Yes, any 12V DC output from a portable power station or a 12V leisure battery will run the strips, and the low wattage means a 100Ah portable battery can power them for many evenings on a single charge.
How portable is the kit for moving between a truck, an ATV, and a campsite?
The four strips, the control box, and the wiring weigh under a pound, and the mounting tape removes cleanly, so you can transfer the setup from a daily driver to an ATV to a tent in a few minutes.
Will the app still control the lights from a distance at a campsite?
Bluetooth range covers roughly 15 to 25 feet in open air, so you can mount the strips in a tent or awning and control color and mode from a chair without leaving your seat.
Do the strips handle temperature swings in an open UTV cab?
The 5050 SMD LEDs operate across wide temperature ranges, and the silicone sleeve tolerates the heat of a summer cab and the cool of an early morning ride without cracking or yellowing.
Is this a good tailgate party lighting upgrade for football games?
Yes, the chasing effects and the music sync mode turn any truck bed or hatchback into a glowing team color setup, and you can save team colors as a custom scene in the app for one tap access.
How does this compare to a battery powered camping lantern?
A lantern only gives white task light, while this kit offers full color ambience and music sync, turning a campsite into a personalized lounge that matches the mood of the evening.
Will the adhesive hold up on an ATV or UTV roll cage?
For roll cages and rough terrain, the included cable ties and screw mounting options provide a more secure hold than tape alone, so the strips stay in place on bumpy trails.
Can I run the lights on a motorcycle, side by side, or golf cart?
Any vehicle or equipment with a 12V battery can run the strips, including golf carts, side by sides, and motorcycles with a 12V electrical system, making the kit highly versatile.
What happens if the strips get splashed at a car wash or rainstorm?
Light splashes are fine because of the silicone coating, but the strips are not designed for full submersion, so avoid direct hose spray on the LED sections and seal any wire connections out of standing water.
Is the sound sync strong enough to be heard over an off road engine?
The mic has a wide dynamic range, but for loud engine and exhaust noise, mounting the control box closer to the cabin speaker or to the rider's helmet mic area gives a cleaner sync signal.
Can the lights run on a solar charged battery for green camping setups?
Yes, pair a small 12V solar panel and a 12V battery, and the low draw of the LEDs will run for hours after sunset, making this a sustainable lighting option for eco conscious campers.
Will the chasing effects be visible in bright daylight at a car show?
The 5050 LEDs are bright enough to read in shaded daylight, and at full brightness the chasing pattern shows clearly under tents, canopies, and shaded show fields, even if direct noon sun washes out most LEDs.
How easy is it to remove the strips without damaging interior trim?
The double sided tape is automotive grade and removes with a little heat from a hair dryer or a few minutes of warm sun, leaving no residue on most OEM plastic, vinyl, and carpet surfaces.
How do I install the Nilight RGB-IC interior strip lights in my car?
Plan the layout by dry fitting each strip under the dash, along the footwell edges, or under the seats, clean the mounting surface with isopropyl alcohol, attach the strips using the included double sided tape or cable ties, route the 2 wire lead to the control box, and plug the cigarette lighter adapter into a 12V socket for a fully reversible install.
How do I connect the lights to the smartphone app?
Power the control box with a 12V source, enable Bluetooth on your phone, open the Nilight or compatible app, and the strips will appear as a discoverable device, then tap to pair and you can select colors, scenes, brightness, and music sync modes.
How does the music sync sound activation work?
The built in microphone on the control box picks up cabin audio and converts the beat into a real time light pattern, and you can adjust sensitivity in the app to match the volume of your speakers, headphones, or a portable Bluetooth speaker.
Will these lights work in a 24V truck or do I need a converter?
The kit is designed for 12V DC systems, so you will need a 24V to 12V step down converter for heavy duty trucks, commercial rigs, and some diesel vehicles, while most cars, SUVs, ATVs, UTVs, and light trucks run native 12V.
Does this kit fit motorcycles, golf carts, boats, or RVs?
Any vehicle with a 12V DC battery can run the strips, including motorcycles, golf carts, boats, and RVs, though for marine use you should seal the connectors and keep the control box away from standing water for long term reliability.
What is included in the box and what do I need to buy separately?
The box includes 4 LED strips, the 12V control box, an RF remote, mounting tape, cable ties, screws, a cigarette lighter adapter, and a user manual, and the only extras you may want are a fuse tap for a hardwired install and isopropyl alcohol for surface prep.
Is it safe to leave the lights on for hours while parked?
The 12V draw is low and the system has short circuit protection, but for extended parked periods you should either unplug the unit or wire it to a switched ignition source so the lights turn off with the key and prevent any battery drain.
Will the LED strips damage my dashboard, carpet, or trim over time?
The strips use automotive grade adhesive that holds firmly without chemical reaction with most plastics, vinyl, and carpet, and the low operating temperature means no heat damage, so removal with a hair dryer leaves the surface clean on most OEM interiors.
What is the difference between RGB and RGBIC strip lights?
RGB strips show one color at a time across the entire strip, while RGBIC strips have an independent control chip that lets different sections show different colors at the same time, producing the chasing rainbow effects that basic RGB strips cannot replicate.
