Muzata IP67 Waterproof LED Strip – 16.4ft 6000K Daylight for Truck Beds, Wheel Wells, and Patio Builds
Muzata IP67 Waterproof LED Strip – 16.4ft 6000K Daylight for Truck Beds, Wheel Wells, and Patio Builds
Couldn't load pickup availability
Why you'll love it
- Triple-row 360 LEDs/m density delivers exceptionally uniform, hotspot-free brightness (3022LM/m) that outperforms single-row strips
- 12V DC low-voltage operation and low heat make the strip touchable and safe for homes with kids or pets
- IP67 waterproof variant opens up genuine outdoor and vehicle use, while IP20 option saves cost for indoor-only projects
- Cuttable every 9 LEDs and strong self-adhesive backing enable custom-length, tool-light DIY installs without an electrician
- Dimmable with a separate controller allows mood/ambient tuning from task brightness down to accent glow
- 16.4ft roll covers most room or vehicle runs in a single piece, reducing splice points and voltage drop
Perfect for
- Illuminate dark kitchens and under-cabinet workspaces with bright daylight white light
- Custom-cut and link strips for tailored DIY accent lighting projects in bedrooms or offices
- Add high-output lighting to truck beds, wheel wells, or vehicle interiors for off-road or show builds
- Backlight retail display cases, restaurant bars, or signage with uniform 6000K daylight
- Replace fluorescent under-cabinet fixtures with low-heat, dimmable LED tape
Super Bright 3 Rows 1800LEDs SMD 2835 6000K Daylight White LED Strip Lights
- Easy To Install
The LED strip can be cut every 9 LEDs according to the cutting marks, making it ideal for effortless DIY projects. Casing waterproof IP67 too heavy, no double-sided adhesive on the back. Comes with 6 fixing clips to firmly fix the LED strip light and prevent it from falling off.
- Applications
Widely used in various living, working and home lighting.
Light up hotels decoration use,Theaters, clubs, shopping malls, festivals and performances.
- Packaging
Only the 16.4ft White LED strip is included.
- WARNING
Before connecting to the power supply, please unfold the LED strip completely to ensure sufficient heat dissipation.
Connection Instructions
TAKE NOTE: the LED Strips maximum run length is 5 meters. After the maximum run length the voltage drop becomes too great and you will lose light and efficiency from your system. If your application needs more than the maximum run length you will have to get another power supply or run wire from the extra strip directly back to the first power supply (wiring in parallel).
Product Information
Super Bright Triple Row: 16.4ft white led strip lights with 360LEDs per meter high-brightness LEDs, generates up to 3022LM per meter of brightness, enough to illuminate those dark rooms, under cabinets, decorate and brighten up the home. Safe to use: LED light strips operates at DC 12V with very low heat. It is touchable. The excellent heat dissipation makes it more durable and reliable. Linkable & Cuttable:The LED strip lights can be cut along the cutting mark every 9 LEDs(3 rows), making it perfect for easy DIY projects. The strong self-adhesive tape allows for easy mounting on installation surfaces. Packaging: Only the 16.4ft/5M white LED strip light is included. The DC 12V power supply and LED dim controller need to be purchased separately. Note: Do not light the LED strip lights while it is still on the reel.Please unroll the LED strip lights for proper heat dissipation.The non-waterproof IP20 LED strip is suitable for dry locations use only and can be used for decorative lighting in kitchens, bedroom, offices, display cases, restaurants, under cabinet.
Features & Specs Indoor Outdoor Usage Outdoor Additional Features Waterproof Light Source Type LED Power Source DC Light Color Bright White Color Temperature 6000 Kelvin Controller Type Button Control Voltage 12 Volts (DC) Wattage 150 watts Control Method Remote Water Resistance Level Water Resistant Style Color White Theme Indoor Occasion Christmas Product Style Modern Measurements Number of Light Sources 1800 Number of Items 1
Frequently Asked Questions
Is the IP67 variant actually waterproof enough for a truck bed or wheel well?
Yes. IP67 means the strip is fully sealed against dust and protected against temporary immersion. The silicone sleeve handles rain, mud, road spray, and brief puddle crossings, making it suitable for truck beds, wheel wells, and engine bay accent lighting.
Can I leave the IP67 strip outside on a patio year-round?
IP67 handles rain, snow, and splashes but is not rated for permanent submersion. For year-round patio or pergola installs, mount the strip in an aluminum channel with end caps and avoid locations where water can pool around the strip.
Will the strip survive engine bay heat and vibration?
The IP67 silicone sleeve protects against heat, oil mist, and vibration typical of engine bay runs. Mount the strip away from direct exhaust and moving belts, and secure it with extra adhesive promoter or zip-tie clips for long-term hold.
Can I power this strip from my vehicle's 12V battery?
Yes. The strip runs natively on 12V DC, which matches a car or truck electrical system. Wire it through an in-line fuse and a switch, or to an existing accessory circuit. Many off-road and show builders tap it directly to the battery with a fuse.
Is the strip flexible enough to follow wheel well curves?
The triple-row tape is still flexible along its length. It can curve around wheel wells and bed rails as long as you bend it gently across the full width rather than folding it sharply, which would damage the LED row.
How does this compare to LED rock lights or pod lights for trucks?
Rock lights and pods produce point sources that create harsh hot spots. A triple-row LED strip lays down a continuous line of light along the bed rail, wheel well, or underbody, which reads as a more uniform, custom build look.
Can I use this strip for outdoor dining or pop-up event lighting?
Yes. The IP67 strip works well under pop-up canopy frames, bar tops, and signage edges. Run it from a portable 12V battery pack for true off-grid event lighting at markets, weddings, or camping setups.
Is the strip bright enough to be visible in daylight on a vehicle?
At 3022LM/m, the strip is highly visible in shaded areas and at dusk. In direct midday sun it reads more as an accent than primary light, which is typical of any LED strip used on vehicles.
Will the adhesive hold up to road vibration and weather?
On a clean, dry metal or plastic surface the factory 3M adhesive is a strong start. For long-term vehicle and outdoor use we recommend adding 3M Adhesion Promoter or mechanical clips to back up the bond against vibration and thermal cycling.
Can I use the IP20 indoor strip outside?
No. The IP20 version has no moisture protection and will fail quickly if exposed to rain, condensation, or splashes. Use IP67 for any outdoor, vehicle, bathroom, or semi-exposed location.
What if a section of the strip gets damaged on a trail or job site?
Cut out the damaged section on the marked cut lines and solder or clip in a replacement piece. Because the strip is cuttable every 9 LEDs and linkable, field repairs are straightforward and don't require replacing the whole roll.
How long will the IP67 strip last in outdoor sun?
Mounted in an aluminum channel and not left sitting in standing water, the strip will deliver years of regular use. The silicone sleeve resists UV reasonably well, but a channel or shaded mounting extends the lifespan further.
How do I install this LED strip light?
Plan your layout and measure the run. Cut the strip only on the marked cut lines every 9 LEDs. Peel the 3M backing, press firmly onto a clean, dry surface, wire the strip to a 12V DC power supply matching the wattage, and add a dimmer controller if desired.
What power supply do I need?
A regulated 12V DC power supply rated for at least the total wattage of the strip run. A 5-meter roll typically needs a 12V 5A (60W) supply. Use a UL-listed driver and leave 20% headroom for long-term reliability.
How do I cut and reconnect the strip?
Cut only along the marked lines between the copper pads. To reconnect, either solder jumper wires to the pads or use 4-pin solderless clip connectors. Make sure polarity is consistent across all connected pieces.
Is this strip compatible with standard 12V LED dimmers?
Yes. It works with any 12V DC LED dimmer controller sized for the run, including inline knob dimmers, RF remotes, and smart Wi-Fi dimmers. Match the dimmer's amperage to the strip's draw for smooth, flicker-free dimming.
Will this work with my existing 12V battery, solar setup, or off-grid power?
Yes. Any clean 12V DC source in the 11V–14.4V range will run the strip. Common matches include car batteries, motorcycle batteries, 12V solar charge controllers, and portable 12V lithium power stations.
What comes in the box?
One 16.4ft (5m) roll of LED strip in the variant you selected (IP20 or IP67). A 12V DC power supply, dimmer controller, connectors, and aluminum mounting channel are typically sold separately so you can size them to your project.
Is this LED strip safe to leave on for long periods?
Yes. 12V DC operation and efficient SMD 2835 LEDs keep the strip cool to the touch, and the strip is rated for tens of thousands of hours of continuous use. Use a UL-listed power supply and avoid sealing the strip in an airtight enclosure.
What is the warranty and what if a section stops working?
The strip is covered against manufacturing defects. If a section fails, you can cut out the affected segment on the cut lines and link in a replacement piece rather than replacing the entire roll, which makes troubleshooting straightforward.
What's the difference between an LED strip light and LED rope light?
LED strip lights are flat, flexible tape with closely spaced surface-mount LEDs, cuttable to length, and ideal for hidden installs under cabinets, in coves, and along edges. LED rope light is a thicker cylindrical tube with widely spaced LEDs inside, typically used for outline and holiday lighting and not cuttable to fine increments.
