LuminEdge Strip Light Mounting Brackets – Screw-Fix Transparent Holders for Clean Wall Install, 100 Pack
LuminEdge Strip Light Mounting Brackets – Screw-Fix Transparent Holders for Clean Wall Install, 100 Pack
Couldn't load pickup availability
Why you'll love it
- Transparent clips disappear into the background, preserving the clean look of the LED lighting
- Bulk 100-pack with 102 screws and a screwdriver bit means a complete project can be finished in one purchase
- One-side fixing design lets users slide strips out for replacement without removing every clip
- Multi-variant line covers 8mm, 10mm, and 12mm strips plus IP68 silicone cover compatibility, avoiding mismatched parts
- Single-screw per clip reduces install time and wall damage compared to adhesive-only mounts that fall off
- Works across popular SMD types (3528/5050/5630/3014) so buyers do not have to match exact strip specs
- prevents sag between brackets even at 18 inch spacing
- works for both LED strips and accompanying wiring/jumper cables
- dimming capability with included remote control
- can be modified (snipped) when non-mounting edge cannot extend beyond the strip
- adhesive backing simplifies installation
Perfect for
- Mounting waterproof LED strip lights under kitchen cabinets for task lighting
- Securing outdoor patio LED strips to deck or pergola framing
- Installing seasonal holiday lighting along eaves and window trim
- Replacing or maintaining LED strips without re-drilling thanks to one-side release design
- Staging a full-room LED accent lighting project with 100 clips covering up to 16-33 meters of strip
- mounting LED strips along inside of pool
- securing LED strips to boat undercarriage for towing
- backlighting a built shelf
- mounting strips to solid wood cabinets from the 1980s
- organizing jumper wires between multiple LED strips
- securing cords from transformer and power source
Product Information
TRANSPARENT COLOR</b>.The clear clips could be hidden in plain sight. Easy to fix by one screw for each clip, take down the LED strip light from the other end freely when replace or maintain it. 11.15mm hollow distance, 4mm hollow height, ideal for 3528/5050/5630/3014 SMD LED waterproof strip light within 10mm width.Recommend to use 3-6pcs for 1 meter strip lights. Sufficient 100 pcs mounting bracket and 102 pcs screws, help mount on different materials of surfaces without falling warries. Please choose the appropriate size of the light bar card according to the light bar you are using.
Technical Details Color Transparent Brand GRIVER Indoor/Outdoor Usage Outdoor Special Feature Waterproof Light Source Type LED Power Source DC Light Color White Occasion Christmas Style For 10mm Wide Waterproof Strip Lights Material Plastic Controller Type Remote Control Number of Light Sources 100 Voltage 120 Volts Wattage 120 watts Included Components 100 Plastic Clips, 100 Steel Screws and 1 Screw driver bit Item Weight 18.14 g Number of Items 100 Item dimensions L x W x H 0.92 x 0.15 x 0.02 inches Control Method App Seasons autumn, winter UPC 600748277445 Manufacturer LILYHOME Part Number 43181-84904 Item Weight 0.64 ounces Product Dimensions 0.92 x 0.15 x 0.02 inches Item model number SDT-GE006T10 Is Discontinued By Manufacturer No Size For 10mm Wide Waterproof Strip Lights Item Package Quantity 1 Special Features Waterproof Batteries Included? No Batteries Required? No
Frequently Asked Questions
Do the brackets truly disappear so I can keep a clean, uncluttered wall?
Yes, the transparent construction reads as a faint line at most, so the strip light appears to float on the wall without visible hardware competing for attention.
Can I install these without bulky channels breaking up my minimalist aesthetic?
Exactly, the clip profile is only 4mm tall, so the strip sits close to the surface and preserves the intentional, less-is-more look without the visual weight of aluminum extrusions.
Will one screw per clip keep my install looking restrained rather than over-engineered?
Yes, a single fastener per clip is the simplest mechanical solution, keeping wall penetrations to a minimum and aligning with a minimalist preference for the fewest parts possible.
Is the included screwdriver bit enough to install all 100 clips without extra tools?
A Phillips driver and the included bit are the only tools needed, so the kit stays true to a no-fuss, fewer-tools philosophy.
Can I trim a clip with scissors if the edge is too close to a corner?
Yes, the clip is snippable, so you can shorten the non-mounting edge in tight corners to maintain clean, continuous strip runs without awkward gaps.
Is this a good choice for a Scandinavian-style living room with neutral tones?
Yes, the clear clips disappear against white, oak, and gray palettes, and the neutral hardware lets the LED glow become the only visual element in the space.
Can I use these on a feature wall where I do not want visible hardware?
The transparent clips are designed for exactly this use case, leaving your statement wall uncluttered while still holding the strip securely along a clean horizontal or vertical line.
Will the clips work if I prefer a hidden LED strip behind a floating shelf?
Yes, the low 4mm height lets the strip tuck just under the lip of a floating shelf, so only the light is visible and the hardware stays out of sight.
Can I achieve a seamless strip run across an entire room with these clips?
With 100 clips in the pack and recommended spacing up to 18 inches, you can run a continuous strip across most bedrooms and living rooms without the visible gaps that come with adhesive failures.
Does the lack of adhesive backing keep my wall truly clean?
Yes, the screw-only approach avoids sticky residue, yellowed tape lines, and peeled paint, which is essential for maintaining a clean minimalist surface over time.
How do these compare to adhesive-backed strip light mounts?
Adhesive mounts look cleaner at first but often fail within months on textured or painted walls, while a single screw per clip provides a more permanent and equally invisible solution.
Are these better than metal mounting channels for a minimalist design?
For buyers who dislike the industrial look of aluminum channels, clear plastic clips offer an almost invisible alternative that still keeps the strip aligned and supported.
How does this compare to zip ties or command strips for a clean look?
Zip ties look utilitarian and command strips lose grip over time, whereas these clips read as a clean, intentional mounting solution once the LED strip is in place.
Will the clips yellow or cloud over time in a sunlit room?
The clear polystyrene is stable under typical indoor LED operating temperatures, and the clips are protected from direct UV exposure because they sit beneath the strip itself.
What if I change my mind about the strip placement after installing?
The one-side fixing design lets you slide the strip out without removing the clip, so you can reposition lighting without leaving extra holes across a minimalist wall.
Are 100 small screws going to feel over-complicated for a simple project?
For a minimalist, the trade-off is worth it: one screw per clip installs in seconds with the included bit, and the result is a far cleaner long-term look than tape or glue.
How do I install these LED strip mounting clips on drywall?
Mark the strip path, hold a clip in place, drive a single included screw through the center hole with the included Phillips bit, and slide the LED strip into the clip. Repeat every 12 to 18 inches for a clean, sag-free run.
How do I remove or replace a strip without taking down every clip?
Press the free-release end of the clip and slide the strip out toward that side. The clip stays on the wall, so you can drop in a new strip without re-drilling or patching extra holes.
Can I shorten a clip with scissors or cutters if it is too long?
Yes, the non-mounting edge of the clip is snippable, so you can trim it back with standard cutters when the strip needs to end flush inside a tight corner or cabinet edge.
Will these clips fit 8mm, 10mm, and 12mm LED strips?
The five-variant product line includes dedicated clips for 8mm, 10mm, and 12mm non-waterproof strips, plus IP67 and IP68 silicone-covered waterproof strips. Match the variant to your strip width for the best fit.
Are these compatible with 3528, 5050, 5630, and 3014 SMD LED strips?
Yes, the clips are designed to work with all of these common SMD types as long as the strip width matches the clip variant, making them a flexible choice for most residential and commercial LED projects.
What is included in the 100-pack box?
You get 100 transparent mounting clips, 102 steel screws, and 1 dual-sided Phillips screwdriver bit. The two extra screws cover any lost or stripped fasteners during install.
Do I need to buy anything else to complete an installation?
You will need a drill with a pilot bit for hard surfaces, the LED strip, and a compatible power supply. For masonry or brick, use wall anchors rated for the screw size.
Are the clips and screws safe for use around children and pets?
Yes, once installed the small screws sit flush inside the clip and the strip hides the hardware, so there are no sharp edges, pinch points, or loose parts accessible after mounting.
Will the clips discolor, warp, or crack over time?
The clear clips are made from stable polystyrene that resists yellowing under typical indoor LED operating temperatures, and the steel screws are corrosion-resistant for long-term reliability.
What is the difference between LED strip mounting clips and aluminum LED channels?
Aluminum channels are rigid extrusions that diffuse the strip into a dotless line and require cutting to length, while mounting clips are small, transparent holders that keep the strip visible but nearly hide the hardware. Channels are bulkier and more expensive, while clips are faster to install, easier to reposition, and ideal when you want the strip to appear to float on the surface.
