Klein Tools 32561 Stubby Screwdriver – Field Service Driver for Outdoor Panels, Disconnects, and Meter Bases
Klein Tools 32561 Stubby Screwdriver – Field Service Driver for Outdoor Panels, Disconnects, and Meter Bases
Couldn't load pickup availability
Why you'll love it
- Carrying one tool instead of six cuts down belt clutter and trips back to the truck
- Cushion-Grip handle delivers higher torque with less hand fatigue during long workdays
- Stubby 1-1/4-Inch shaft reaches recessed fasteners that full-size drivers cannot access
- Klein's 160+ year American manufacturing heritage signals long-term durability over cheap imports
- Heat-treated industrial-grade bits resist cam-out and wear far longer than standard bits
- Set and kit variations let buyers add an electronic-bit companion or expand capacity without buying a new handle
Perfect for
- Driving Phillips and slotted screws inside shallow electrical boxes and recessed outlets
- Tightening 1/4-Inch and 5/16-Inch hex nuts in tight mechanical assemblies without carrying a separate nut driver
- Switching between four bit types and two nut driver sizes on one shaft to reduce tool changes on the job
- Working in confined panels and cabinets where a full-size screwdriver is too long to fit
- Building out a starter set or expanding an existing Klein multi-bit collection via replacement bit SKUs (32396, 32398, 32412)
11-in-1 screwdriver / nut driver with fast interchangeable blade
3 nut drivers, 2 Phillips, 2 slotted, 2 TORX and 2 square recess
Multi-bit screwdriver has Phillips, Slotted bits, Nut Drivers
About Klein Tools
As an American manufacturer of hand tools for more than 160 years, Klein Tools makes premium-quality, professional-grade tools that deliver performance, durability and precision. Our team continues to put six generations of expertise into each tool by using the highest quality materials and superior workmanship.
Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day … Since 1857.
Screwdriver Set, 11-in-1 Multi-bit Screwdriver, 6-in-1 Stubby, Phillips, Slotted, Square, Torx Bits, 2-Piece
This 2-piece Klein Tools 11-in-1 multi-bit screwdriver / nut driver, and the 6-in-1 multi-bit screwdriver / nut driver stubby has everything the professional needs. The integrated screwdriver / nut driver shaft on the 11-in-1 holds 8 popular tips and converts to 3 nut driver sizes. Klein's Multi-Bit Stubby screwdriver is small to allow easy access to tight work spaces.
- A complete, high-performance kit that offers convenience and value
- Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561)
- 11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
- 11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess
- 6-in-1 multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes
- 6-in-1 includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted
- The compact design of the multi-bit stubby features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces
- Cushion-Grip handle provide greater torque and comfort
Product Information
Multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes Includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted Compact design features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces Cushion-Grip handle provide greater torque and comfort Replacement bits available: Cat. Nos. 32396, 32398, 32412 U.S. Patent No. D684,836 Non-insulated
Klein's Multi-Bit Stubby screwdriver is small to allow easy access to tight work spaces. Cushion-Grip handles provide greater torque and comfort. The heat-treated bits are industrial strength for the ultimate in durability and performance. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.
Frequently Asked Questions
Is the 32561 tough enough for outdoor commercial jobsite conditions?
Yes. The heat-treated bits, rugged shaft, and Cushion-Grip handle are designed for daily trade use in environments like rooftop HVAC units, exterior disconnects, parking lot lighting, and outdoor service equipment. It is built by Klein Tools, a brand used on commercial jobsites across the U.S.
Will the non-magnetic nut driver inserts work on outdoor galvanized or stainless hardware?
Yes. The 1/4-Inch and 5/16-Inch nut driver inserts are non-magnetic, which is actually an advantage on stainless and galvanized fasteners because there is no magnetic attraction to misalign the tool when you start the nut. You get a clean, straight engagement.
How portable is it for technicians who travel between remote service calls?
The stubby 1-1/4-Inch shaft and compact handle make it easy to pocket, clip to a belt, or drop into a small tool roll. For mobile techs, field service engineers, and traveling maintenance staff, it is a low-bulk way to carry six tool functions in one driver.
Can it handle tight outdoor enclosures like pool equipment pads and irrigation controllers?
Yes. Compact outdoor enclosures are exactly the use case the stubby shaft was designed for. The short profile fits inside pool pump wiring compartments, irrigation controller cabinets, and gate operator housings where a full-size screwdriver physically cannot reach.
Does it hold up in heat, cold, and weather exposure when left in a service truck?
The Cushion-Grip handle remains comfortable across a wide temperature range, and the metal shaft and heat-treated bits tolerate typical truck-cab conditions. As with any precision hand tool, storing it in a closed toolbox or inside the cab rather than loose in an open bed will extend its service life.
How do I change between the Phillips, slotted, and nut driver bits on the 32561?
Pull the current bit straight out of the shaft, select the bit you need, and press it firmly into the shaft until it seats and locks. No extra tools or sleeves are required. To switch to a nut driver size, retract the bit into the shaft storage position and slide the appropriate 1/4-Inch or 5/16-Inch nut driver insert into place.
What are the exact bit and nut driver sizes included with this tool?
The shaft holds four driver tips: #1 Phillips, #2 Phillips, 3/16-Inch slotted, and 1/4-Inch slotted. It also accepts two nut driver sizes: 1/4-Inch (6 mm) and 5/16-Inch (8 mm).
How do I store and maintain the screwdriver to maximize its lifespan?
Retract bits fully into the shaft when not in use, wipe the shaft dry after exposure to moisture, and occasionally apply a light oil to the bit storage channel to keep the press-fit action smooth. Store in a dry toolbox or drawer rather than loose in a wet truck bed.
Are replacement bits available if one of the tips wears out?
Yes. Klein Tools sells replacement bit sets under catalog numbers 32396, 32398, and 32412 that are compatible with the 32561 and other Klein multi-bit drivers. You can swap in fresh heat-treated bits without replacing the entire tool.
Is this screwdriver compatible with Klein's other multi-bit systems and electronic bits?
Yes. The 32561 is part of the Klein multi-bit family, and the shaft accepts standard Klein interchangeable driver bits. If you already own a Klein 11-in-1 or 15-in-1, the same bit sizes are usable across the line, and dedicated electronic-bit sets can extend the tool's capabilities.
What is included in the box when I order the Klein Tools 32561?
The package includes the Klein Tools 32561 6-in-1 Stubby Screwdriver/Nut Driver with the Cushion-Grip handle, the four installed driver bits (#1 Phillips, #2 Phillips, 3/16-Inch slotted, 1/4-Inch slotted), and the two nut driver inserts (1/4-Inch and 5/16-Inch). Replacement bits are sold separately under catalog numbers 32396, 32398, and 32412.
Is it safe to use this screwdriver on live electrical work?
The Klein Tools 32561 is an insulated hand tool in terms of the handle design, but it is not rated as a 1000V insulated screwdriver. For work on or near exposed energized conductors, use a tool specifically rated and labeled for that voltage and follow your local electrical safety codes and NFPA 70E procedures.
Does Klein Tools honor a warranty on the 32561?
Klein Tools stands behind its hand tools with a warranty against manufacturing defects. If the tool fails under normal use, contact Klein Tools directly with your proof of purchase to arrange a warranty evaluation.
How is a multi-bit stubby screwdriver different from a standard full-size multi-bit screwdriver?
A standard multi-bit screwdriver typically has a 3-Inch to 4-Inch shaft for general fastening depth, while a stubby multi-bit like the 32561 uses a 1-1/4-Inch shaft specifically to reach recessed fasteners in electrical boxes, equipment cavities, and tight enclosures. The trade-off is that the stubby cannot drive very long screws in a single stroke, but it can fit where a full-size driver physically cannot.
