Home Techpro Non-Slip Rug Gripper – Stay-Flat Hold for Balcony and Concrete Patio Surfaces
Home Techpro Non-Slip Rug Gripper – Stay-Flat Hold for Balcony and Concrete Patio Surfaces
Couldn't load pickup availability
Why you'll love it
- No glue means no sticky residue, staining, or damage to hardwood or laminate floors
- Suction-pore vacuum technology holds rugs firmly yet peels off cleanly when rearranging
- Less than 1/10 inch thick keeps the gripper invisible under the rug for a clean look
- Washable design means the gripper can be cleaned without separating from the rug
- Scalable pack sizes (1, 4, 8, 12, 24) let buyers match quantity to room count and rug size
- Reduces risk of trips and falls from sliding or curling rugs, especially for kids and seniors
Perfect for
- Securing small area rugs and runners on hardwood or tile floors without leaving residue
- Flattening curled rug corners that pose trip hazards in kitchens and bathrooms
- Anchoring bath mats on tile to prevent slipping after showering
- Temporarily stabilizing outdoor patio rugs on smooth decking or concrete
- Replacing traditional glue rug tape in rental properties where floor damage is a concern
Home Techpro started in 2018 , the simple goal is to provide innovation gripper for rug.
We are committed to bring innovation to solve the rug roll up issue.
Two types of items for you : vacuum tech rug pad gripper and dual-sided rug pad gripper.
What types of surfaces are not suitable for rug pad grippers?
The grippers are not suitable for textured, damaged, or aged floor, or carpeted floor. They should also not be used with rubber-backed, jute-backed, or fluffy-backed rugs.
Can the rug pad grippers be reused after removal?
Once affixed, the adhesive cannot be easily removed and reused.
How should I wash the rug pad grippers?
When cleaning the rug, do not remove the gripper. It is advisable to wash them together in a laundry bag on a gentle cycle, ensuring it is thoroughly rinsed and completely air-dried before reuse. Avoid using a dryer.
Innovation Rug Pad Gripper
What problem are we solving?
Your rugs curl up or slide issue.
What makes our products unique?
Not only do the job well, but also protect your floor!
Vacuum Tech rug pad gripper uses vacuum tech instead tape to grip floor firmly !
Dual-sided rug pad gripper use unique resuable tape and square design to grip floor firmly !
How do you choose between vacuum tech or dual sided rug pad gripper ?
For heavy or large carpet or outdoor use, suggest to use the dual-sided rug pad gripper.
If you remove the rug often, suggest use the vacuum rug pad gripper.
Product InformationUnique Design: Do you still worry about the traditional glue rug tape harm your floor ? This gripper uses VACUUM TECH design which grips hard smooth floors firmly and easily, this design can protect your floor perfectly as no glue used on floor. But it does not work for rug on carpeted floor. It does not work for rubber backed rug ,jute rug or fluff backing rug.
Design Feature. This product can easily be glued under rug. The side facing the floor features tiny suction pores. These pores utilize the VACUUM TECH feature in which whenever pressure is applied from the top, air escapes and creates a low-pressure region within the cups. This produces an adhesive effect, which keeps your rug in place.
Advantages. The rug anti curling gripper is less than 1/10 inch thick and inconspicuous after installing. Suction technology firmly sticks to the floor without causing marks or damage, and the gripper easily peels off the floor. It is convenient to wash, as you won’t have to separate it from your carpet for cleaning. The tape for rug adds extra comfort underfoot owing to the slightly bouncy nature of suction technology.
Components. This package includes 4 pieces. The size of the gripper is 3.9inch x 3.9inch. Each piece is square in order to increase the surface area in contact with the floor. That leaves your kitchen, bathroom, and hallway much more secure. You can even use them outdoors to prevent slipping and flatten corners.
Service: This gripper ensures that your rug remains securely in place, and helps to prevent accidental slips and falls
Number of Items: 4
Included Components: Vacuum TECH Grippers For Rug
Item Type Name: “VACUUM TECH” - New Materials to Anti Curling Rug Pad : Keep your rug in place & Make corner flat and Easily Peel off when need
Item Dimensions L x W: 3.9"L x 3.9"W
Size: 4 Pack
Item Weight: 0.6 ounces
Item Thickness: 0.1 inches
Material Type: Polyester fibre,Acrylic resin
Product Care Instructions: Washable,Possibly with additional guidelines not provided
Color: White
Shape: Square
Surface Recommendation: Hard Floor
Frequently Asked Questions
Will the gripper hold an outdoor patio rug on a smooth concrete deck?
Yes. Smooth concrete is one of the best surfaces for vacuum pore suction, and the gripper is designed to anchor outdoor rugs on hard decking, patios, and stone where wind and foot traffic would otherwise shift the rug.
Can I leave the grippers outside through rain and sun?
The polyester fiber and acrylic resin build is durable enough for covered outdoor use. For fully exposed areas, it's best to bring the rug in during heavy weather, which also gives you a chance to rinse and re-press the grippers.
Does the gripper work on composite decking?
Yes, as long as the decking surface is smooth and clean. The suction pores need direct contact, so any grit or sawdust under the gripper will reduce hold, but on a clean composite board the rug stays put.
Will the gripper hold up to wind on a balcony rug?
Yes. Wind is one of the main reasons outdoor rugs creep, and corner grippers resist the lift that turns a flat rug into a sail. Place squares at each corner and the rug stays grounded in normal wind conditions.
Can I use the gripper under a camping or picnic mat on a hard surface?
Yes. On smooth campground tables, picnic platforms, or hard-packed sites, the gripper works the same way it does indoors. It is not designed for grass, sand, or loose soil, where the suction pores cannot make full contact.
I'm taking a patio rug to a rental, will the gripper damage the deck?
No. The glue-free install protects the deck surface, and the gripper peels off cleanly when you leave. This is one of the most common outdoor use cases because it solves the renter's exact problem of holding a rug without risking the deposit.
How does this compare to outdoor rug pads with spikes or weights?
Spike-style pads and weighted corners can damage softer decking and are awkward to install. The flat, glue-free gripper lays invisibly under the rug and does not interact with the deck surface at all.
Is the gripper weather-resistant enough for a covered porch year-round?
Yes. Covered porches are the ideal outdoor environment for the gripper because they avoid the worst of direct sun and standing water, and the washable surface handles routine cleaning from dust and pollen.
Will a heavy outdoor rug need more than one gripper per corner?
For larger rugs, two squares per corner or additional squares along the edges give stronger hold. The 12 and 24 packs are designed for exactly this, multiple squares across a big patio rug rather than just four corners.
What if the gripper gets dusty and loses hold outside?
Lift the square, rinse it under water, let it air dry, and press it back in place. Outdoor dust and pollen are the most common cause of reduced suction, and a quick rinse restores full hold.
Can I use the gripper on a stone patio with uneven grout lines?
Smooth stone works well. For textured stone with deep grout lines, place the square on a flat, unbroken section of stone so the suction pores can make full contact, and the rug will stay anchored.
Will the gripper hold an outdoor runner that runs along a sliding door?
Yes. Place squares every few feet along the runner, especially near the high-traffic ends. The vacuum pore hold keeps the runner flat under the door so it doesn't catch on the track.
Does the gripper work in cold weather?
Yes. The materials stay flexible in typical cold-weather outdoor temperatures, and because there is no adhesive, there is no risk of the bond becoming brittle or failing in winter conditions.
How do I install the rug gripper on my rug?
Lift the corner or edge of the rug, place a gripper square on the floor with the suction side down, press the rug back over it, and step on the corner for a few seconds. The vacuum pore suction activates under pressure, and the rug is anchored.
How do I clean the gripper without losing suction?
Peel the gripper off the floor, rinse it under plain water, gently shake off the excess, and let it air dry. Once dry, press it back in place and the suction hold returns to full strength. No soap is required for routine cleaning.
Can I cut the gripper to fit a small rug corner?
The 3.9 x 3.9 inch square is sized for most standard corners. If you need to fit a tighter space, the gripper can be trimmed with scissors, though cutting slightly reduces the suction surface area and may lower hold strength.
Will this work on carpet or plush rugs?
The gripper is designed for smooth hard floors, hardwood, tile, laminate, vinyl, polished concrete, and similar surfaces. It is not designed for use directly on wall-to-wall carpet or rugs laid over deep carpet padding, where the suction pores cannot make solid contact.
Does it work with all rug sizes and materials?
Yes, from small bath mats to large area rugs, and across cotton, wool, jute, synthetic, and flatweave materials. The gripper anchors the rug to the floor rather than bonding to the rug itself, so rug type does not affect performance.
What comes in the box when I order?
You receive the quantity of gripper squares you ordered, 1, 4, 8, 12, or 24 pieces, each individually ready to use. There is no extra tape, adhesive, or installation tool required.
Is it safe for pets, and will it hold up to claws and chewing?
The gripper is pet-safe in normal use. It contains no toxic chemicals and no small swallowable parts. Because it sits flat under the rug, most pets ignore it entirely, and the durable polyester fiber surface resists damage from routine contact.
Will the gripper lose suction over time?
The vacuum pore suction is designed for long-term hold. If you notice a reduction, a quick rinse and air dry restores full performance. There is no adhesive to dry out, so the gripper does not expire the way tape does.
How is this different from traditional double-sided rug tape?
Rug tape uses adhesive that bonds to both the floor and the rug, which means residue, staining, and floor damage on removal. The vacuum tech gripper uses suction pore pressure instead of glue, so it holds firmly, peels off cleanly, and leaves no mark on hardwood, tile, or vinyl.
