DAYBETTER LED Strip Lights 32.8ft – Clean White and Neutral Tone Accent for Intentional Minimalist Bedrooms
DAYBETTER LED Strip Lights 32.8ft – Clean White and Neutral Tone Accent for Intentional Minimalist Bedrooms
Couldn't load pickup availability
Why you'll love it
- Three length options (16.4ft / 32.8ft / 66ft) fit any room size without cutting or splicing
- IP65 waterproof strip lets you use the same lights indoors and outdoors for parties and holidays
- Strong adhesive sticks to clean dry surfaces like TVs, cabinets, and car interiors without falling off
- 20 colors and 8 dynamic modes on a 44-key remote give big-customization feel at a budget price
- Low 12V DC operation is safer to handle than mains-powered accent lighting
- Linkable design lets you expand the run later without buying a whole new kit
Perfect for
- RGB backlight behind TV to reduce eye strain during long viewing sessions
- Ambient bedroom mood lighting for relaxation and gaming
- Christmas and holiday party decoration indoors or on a covered patio
- Under-cabinet or stairway accent lighting for safety and ambiance
- Custom themed lighting for birthdays, game nights, or movie marathons
The strip lights are IP65 waterproof Color changing with 20 colors. 8 light pattern: Quick/ Slow/ Auto/ Flash/ 3 color jumpy change/ 7 color jumpy change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease control. It is for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom,TV Backlighting, automobile, mirror, balcony, patio, automobile, etc.
No more accessories are required.
Easy to set up
These lights are very easy to install, make sure to test the lights before hang up
Widely use
Suit for living room, kitchen, cabinet, car, bedroom decoration
Safe to Use Outdoor
These led lights are IP65 waterproof, which means they can be protected against water jets (only the strips are waterproof, the power supply is non-waterproof)
Color: RGB
- Voltage: 12V
- Wide:10mm
- Waterproof: Yes, IP 65
- Input: 100-240V AC 50/60Hz
- Output: DC12V
- RGB control box
- 44 key IR remote control
- Control distance: 5M (must be poniting at the sensor without any obstacles)
- DC: 12V-24V
Product Information
IP65 waterproof: Covered with transparent silicone coating, this LED Strip Lights is dust-tight and rainproof but cannot be soaked in water for a long time, and the color is more crystal clear. (Only the LED strip is waterproof, the control box and power supply are non-waterproof) Strong adhesive:This led strip lights have a stronger adhesive tape, suitable any place as long as it is clean dry such as tv, cars, cabinets and walls 32.8ft (2 Rolls of 16.4ft)Color changing led lights strip can decorate living room, bedroom, kitchen, ceiling, back of TV, desk, stairs and so on Color changing: this led strip lights support 20 colors changing and 8 colors modes changing Widely use: this led strip lights suitable for living room, kitchen, cabinet, car, bedroom decoration
Features & Specs Indoor Outdoor Usage Indoor Additional Features Waterproof, Remote Controlled, Color Changing, Dimmable, Linkable, Adjustable Light Source Type LED Power Source Corded Electric Light Color Multicolor Controller Type Remote Control Voltage 12 Volts Wattage 60 watts Control Method Remote Water Resistance Level Waterproof Style Color Multicolor Theme Tv Occasion Christmas Product Style Modern Measurements Number of Light Sources 300 Number of Items 1
Frequently Asked Questions
Can this strip blend into a minimalist interior without looking busy?
Yes. Set it to a single static warm white, soft amber, or muted tone and dim it down. The strip itself is hidden, so all you see is a clean wash of light along an edge, ceiling line, or shelf.
Will the 44-key remote clash with a clean, uncluttered space?
The remote is small and slim and can be tucked into a drawer or left on a single coaster. Many minimalist users only pull it out when they want to change the color or brightness.
Does the strip itself add visual clutter to my walls or furniture?
No. The LED strip is only about 10mm wide and the silicone coating is transparent, so it nearly disappears against most surfaces. The visible result is just the glow, not the hardware.
Is the adhesive going to leave my surfaces messy?
On clean, smooth surfaces like the back of a TV, glass, metal, or finished wood, the adhesive comes off cleanly. We recommend avoiding freshly painted walls if you want a perfectly residue-free removal.
Can I hide the wires and controller so my space stays clean?
Yes. The controller is small enough to fit behind a TV, under a desk, or behind a piece of furniture, and the power cable can be run along baseboards or behind a media console for an invisible install.
Is this a good choice if I prefer neutral, calming colors?
Absolutely. The 20 static colors include several warm whites, soft ambers, and gentle peach tones that pair naturally with linen, oak, and other minimalist materials.
Will the dynamic modes feel too distracting in a calm space?
The 8 dynamic modes are entirely optional. For a minimalist look, simply ignore them and stay on a single static color. The remote makes it easy to disable modes you do not want.
Can the strip double as a soft night light in a minimalist bedroom?
Yes. Set it to a very low warm white and it acts as a gentle night light that does not break the visual calm of the room. It is a popular alternative to plug-in nightlights because it is hidden in the architecture of the space.
Is one single 16.4ft strip enough for a small minimalist room?
For most small bedrooms, a 16.4ft run along the headboard or behind a single piece of furniture is plenty. Less really is more when it comes to minimalist lighting.
Will the glow compete with natural light in a bright, airy room?
The strip is meant to complement, not replace, daylight. During the day it reads as a subtle accent, and at dusk it becomes the room's primary ambient light source.
How does this compare to a high-end architectural LED strip?
Architectural LED channels with diffusers look slightly more polished, but they require hardwiring, drywall work, and a much higher budget. For a renter-friendly minimalist look, this strip gets you about 90% of the visual effect at a fraction of the cost.
Is it better than a minimalist table lamp for ambient lighting?
A table lamp is a visible object in the room, which sometimes works against the minimalist look. A hidden LED strip produces the same warm wash of light without adding a piece of furniture to style around.
How does it compare to a smart bulb with color modes?
A smart bulb is a single point of light and usually requires an app or hub. The LED strip is hidden in the architecture, runs on a simple remote, and creates a wall-washing effect that a bulb cannot replicate.
I'm worried it will look tacky. How do I keep it minimalist?
Stick to one static color, keep the brightness low, and hide the controller and wires. The biggest mistake is using bright dynamic modes in a calm space; once you set it and forget it, the result is very minimalist.
Will the strip look fine on natural materials like wood or stone?
Yes. Warm white or amber tones complement wood, stone, linen, and other natural materials beautifully. The contrast between a textured surface and a soft glow is exactly the kind of layering minimalists love.
Can I install it without drilling or visible hardware?
The 3M-style adhesive means no screws, nails, or brackets. Just peel, stick, and plug in. For a fully invisible install, route the cable behind furniture and place the controller out of sight.
How do I install the LED strip lights?
Clean the surface with alcohol or a non-residue cleaner, let it dry fully, peel the backing off the 3M-style adhesive, and press the strip firmly into place along your chosen edge. Then connect the strip to the IR controller, plug the 12V adapter into a wall outlet, and use the remote to turn it on. Most installations take less than 10 minutes.
Can I cut the strip to a custom length?
Yes. The strip has clearly marked scissor cut points, usually every 3 LEDs. Cut only on these marked lines, and make sure the power is unplugged before cutting. Unused sections can be saved for future projects or discarded.
How do I link two strips together?
Most DAYBETTER strips include a linkable connector on the end. Simply align the copper pads, slide the connector on, and make sure the arrows on the strip match the polarity of the connector. The total run should not exceed the wattage limit of your power supply.
Does it work with Alexa, Google Home, or Apple HomeKit?
The standard kit uses an IR remote and is not natively compatible with voice assistants. To add smart control, plug the 12V adapter into a smart plug or smart outlet that works with your preferred ecosystem, and you can use voice commands to turn the strip on or off.
Will it work behind any TV size?
Yes, but choose the strip length based on the back panel of your TV. A 16.4ft strip is usually enough for TVs up to 55 inches, while 32.8ft and 66ft work well for larger TVs or for running along a media wall.
What is included in the box?
The kit typically includes the LED strip in your chosen length, a 12V DC power adapter, an IR controller box, a 44-key remote (batteries may or may not be included depending on the seller), and a small user manual. Mounting clips are sometimes included, otherwise they are a recommended add-on for outdoor or long runs.
Is it safe to leave on overnight or while I am away?
Yes. The 12V DC power supply runs cool and the LEDs themselves produce very little heat. There is no open flame, no hot bulb, and no risk of overheating under normal use. As with any electrical device, do not cover the adapter or controller, and unplug during severe storms if used outdoors.
Does it get hot enough to damage walls, paint, or furniture?
No. The strip runs at a low temperature under normal use, well below the level that would affect paint, drywall, wood, or plastic. It is safe to leave on surfaces like the back of a TV, under cabinets, and along baseboards.
What is the difference between LED strip lights and rope lights?
LED strip lights are flat, flexible circuit boards with surface-mount LEDs, allowing them to sit flush against surfaces and produce a wall-washing glow. Rope lights are round, tube-encased LEDs that look more like a string light. Strips are usually brighter, more color-accurate, and easier to mount, while rope lights are bulkier but more visible as a decorative element.
