ATB Secure LED Strip Mounting Clips for Family-Safe Kitchen and Bathroom Lighting, Rust-Proof Clear 100-Pack
ATB Secure LED Strip Mounting Clips for Family-Safe Kitchen and Bathroom Lighting, Rust-Proof Clear 100-Pack
Couldn't load pickup availability
Why you'll love it
- One-side screw design halves install time and fits tight, narrow mounting surfaces where traditional two-screw clips fail
- 98% light-transmittance transparent PC keeps strips visually hidden so brightness and color temperature stay true
- UV-resistant material will not yellow outdoors, preserving a clean look for years
- Magnetic rust-proof 80°-hardness screws resist corrosion in damp and outdoor environments
- Works on wood, plastic, metal, and cement walls, eliminating the need to buy separate clip types per surface
- Bulk 100-pack with 102 screws covers long runs (recommended 3-5 clips per meter) at low per-clip cost
Perfect for
- Permanently mounting IP67 silicone-tube LED strips on outdoor walls, eaves, and garden structures
- Securing waterproof accent lighting under kitchen cabinets, inside wardrobes, and along stair guardrails
- Installing LED strips on narrow surfaces and close to edges where two-screw clips cannot reach
- Fastening LED strips on mixed substrates (wood, plastic, metal, cement) without pre-drilling on soft surfaces
- Replacing traditional two-screw clips to cut installation time on large multi-meter runs
Product Information
1, Simple designed for screwing Silicone Tube IP67 Waterproof LED light strips within 12 mm/0.48in width into wood,plastic board, metal /cement wall, such as Cabinet, wardrobe, guardrail, Eaves, Garden, Carriage,etc 2,Clear Designed and high quality material.High light transmittance and no damage to your leds color temperature .Durable plastic with UV resitant material, Perfect for indoor and outdoor use without change to yellow for a long time. 3,One side fixing by screws.Easy to arrange the light strip and maintain.Recommended to use 3-5 pieces clips for 1 meter LED strip light, will be stronger and will not fall easily.Reduce installation time. 4,Magnetic Screws: Rust-proof and 80 degree hardness suit for wood/plastic board/metal/cement wall etc 5,Package including 100 PCS Transparent Clips and 102 PCS Magnetic Screws.The Light Clips can be applied to -30 - 90 ? working temperature, and can be stored at room temperature for Long Time.
ATB-WL00410 light strip clips for 10mm/12mm wide IP67 waterproof led strip lights, which are upgrading designed,Repalce traditional two screws clips, soft silicone clips. Compared with traditional LED Strip mounting clips have follow advantage: 1. One-side screw can reduce the installation time and difficulty. And, the led strip light can be installed on a narrow surface and more closer to the edge of the surface. 2. Widen the press area between the clips and the light strip, so the clips ensure the levelness and can press the strip light more tightly. 3. Hollow height only 3.5mm/0.138inch (old one is 4.0mm). The tightness can be controlled by twisting the screw as required. 4. Pure PC transparent: light transmittance from 86% increase to 98% ,more easy to hide in plain sight,while ensuring that the brightness and color temperature of the light remain unchanged. Note: Before buying light hanger clips, please kindly check up your led strip width and height. 1.Suit for 10mm/0.39 inch and 12mm/0.48 inch IP67 silicone tube led strip light which is DC12V/24V input.The sealing height of the IP67 Silicone tube are not higher than 3.8mm/0.14 inch.(Silicone seal is elastic),The number and type of LED beads do not affect the use. 2.Don't fit for IP20/IP44/IP65 led strip light and. Installation: 1.Before installing the clips. Please use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings. For wood/thin metal surface no need puch holes in advance. 2.Putting screws through the clips and then fixed the screw in the marked mounting holes. 3.Adjust led strip and tighten the screw until the clip completely hold the light strip. 4.Check and good job. suggest 3-5 pieces clips within 1 meter strip lights. Package Including:100pcs clips and 102pcs screws
Frequently Asked Questions
Are these clips safe to use in a child's bedroom or nursery?
Yes. The clips are mechanical fasteners with no electrical conductivity risk, no heat generation, and no sharp edges. They hold LED strips securely against walls and furniture so there are no loose strips a child could pull down.
Will the screws rust in a damp bathroom and stain my walls?
No. The included 80°-hardness magnetic screws are rust-proof, specifically designed for damp environments like bathrooms, shower coving, and outdoor eaves. They will not corrode or leave rust marks on your walls.
Can I trust these clips to hold heavy IP67 silicone strips safely over a baby's crib or bed?
Yes, when installed at the recommended 3-5 clips per meter. The mechanical screw mount is far more secure than tape or adhesive, so the strip cannot fall onto the bed, crib, or anyone sleeping below.
Is the clip material safe if a pet chews on it?
The PC body is a rigid, inert plastic with no sharp edges and no toxic softening agents. However, the clips are designed to be installed out of reach - on coving, ceiling edges, and high walls - to prevent any pet access in the first place.
Do these clips stay attached during sleep-safe nightlight use over long periods?
Yes. Once screwed into the wall or shelf, the mechanical hold is permanent and unaffected by the small temperature changes of an LED nightlight. The strip will not droop, sag, or detach over time.
Are these clips a safe alternative to open-flame candles or hot glue for mood lighting?
Yes. LED strips with these mechanical clips produce no flame, no smoke, and no heat risk to nearby fabrics, curtains, or bedding. You get the cozy candlelight ambiance without any fire, burn, or air quality hazard.
Will the clip hold a strip securely in a stairway where a falling strip could cause someone to trip?
Yes. The single-screw mechanical mount is much stronger than adhesive strips, which can fail over time. With clips every 20-30cm, your stair rail or tread lighting stays firmly attached, eliminating the trip hazard of a fallen strip.
How do these clips compare to double-sided tape for safety in a home with kids and pets?
Double-sided tape weakens with heat and humidity and can suddenly release, dropping the strip. Mechanical screw-mounted clips are permanent and will not fail unexpectedly, which is the safer choice for family homes.
Will the clip itself get hot enough to burn someone if I touch it?
No. The PC clip body does not conduct or retain heat from the LED strip. The strip's own operating temperature is well below burn thresholds, and the clip stays at ambient room temperature.
Can I sleep with the LED strip on all night without worrying about fire risk?
Yes. LED strips with these mounting clips produce negligible heat, no flame, and no combustion risk. They are widely used as flameless nightlights and are safe to leave on through the night when properly installed.
What is the safest way to install these clips on a ceiling or high wall?
Always use a stable ladder, pre-mark your clip positions, and drive the screws straight. The single-screw design is intentionally simple so installs are quick and reduce time spent working at height.
I'm replacing real candles for safety reasons - will these clips give me the same cozy look?
Yes. Combined with a warm 2700K-3000K IP67 LED strip, the clear invisible clips let the light itself create the candle-like ambiance - but with no flame, no soot, no smoke, and no air quality concerns.
Will a child be able to pull a strip down off the wall once it is mounted with these clips?
No. The single-screw mechanical mount is firmly anchored to the wall, shelf, or cabinet. A child pulling on the strip will only succeed in removing the strip from the clip - the clip itself stays attached to the surface.
How do I install these LED strip mounting clips step by step?
Step 1: Plan your clip layout, placing one clip every 20-30cm (3-5 per meter). Step 2: Hold each clip against the mounting surface and drive the single screw through the side hole. On soft wood, no pre-drilling is needed; on metal, plastic, or masonry, use a small pilot hole. Step 3: Press your 10mm or 12mm IP67 silicone-tube LED strip into the clip hollow (sealing height up to 3.8mm). Step 4: Continue along the run, ensuring the strip is fully seated in each clip. The whole process takes seconds per clip.
What tools do I need to install these clips?
You need a Phillips-head screwdriver sized to match the included screws. For hard surfaces like metal, concrete, or brick, a power drill with a small pilot bit (about 2mm) is recommended. No special tools, no crimpers, and no adhesive are required.
Can I remove and reuse a clip if I need to relocate my LED strip?
Yes. Unscrew the single screw, remove the clip from the wall, and remount it at the new location. The PC body does not deform during removal, so clips can typically be reused multiple times. You may need a fresh screw if the original hole becomes loose in soft wood.
Are these clips compatible with my 10mm wide IP67 LED strip?
Yes, the clips fit any IP67 silicone-tube LED strip with a width of 10mm and a sealing height of 3.8mm or less. This covers the vast majority of waterproof LED strips on the market.
Will these clips fit a 12mm wide LED strip as well?
Yes. The clip is designed to hold both 10mm and 12mm IP67 silicone-tube strips. The flexible hollow accommodates the wider strip while still gripping the silicone securely.
What exactly is included in the box when I open it?
Each pack contains 100 transparent PC mounting clips and 102 magnetic rust-proof screws. The 2 extra screws provide a small overage in case any are dropped or lost during install. No tools, adhesive, or LED strips are included.
Is the PC clip material durable enough for long-term indoor and outdoor use?
Yes. The clip is molded from pure PC with 98% light transmittance and built-in UV resistance. It will not yellow, crack, or become brittle across its -30°C to 90°C operating range, giving you years of reliable service indoors and outdoors.
Will the magnetic screws interfere with my LED strip electronics or RF signals?
No. The screws are static-mounted mechanical fasteners and do not carry any current. The magnetic property is incidental to their rust-proof stainless-steel composition and has no measurable effect on LED drivers, controllers, or wireless signal transmission.
What is the difference between a one-side screw clip and a traditional two-screw clip?
A traditional two-screw clip requires two drilled holes, two screws, and twice the installation time. It also needs enough flat surface area to fit both screws. A one-side screw clip uses a single screw on one side, halving install time, fitting on narrow surfaces, and delivering the same holding strength for most residential and commercial LED strip applications.
